StarTech.com 10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km

SKU
110VDSLEXTEU
kr 4 301,42
Ikke på lager Bestillingsvare
10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km
Extend your 10/100Mbps network by up to 1km over Ethernet or RJ11 phone lines
The 110VDSLEXTEU VDSL Ethernet extender kit allows you to span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device allows you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included. A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference. The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat5). Solution Diagrams: Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Provides high speed Ethernet extension over copper telephone line or other existing two pair wiring enabling network connectivity to remote locations up to 1km away
- Allows network connectivity in buildings made of stone/concrete, or heritage buildings where new Ethernet cabling or wireless are impossible
- Simple Plug and play installation with no software or driver installation for a hassle-free setup
SKU 110VDSLEXTEU
EAN 0065030834520
Specification
Performance
TypeNetwork transmitter
Maximum transfer distance1000 m
Data transfer rate100 Mbit/s
Auto MDIX IEEEYes
Technical details
TypeNetwork transmitter
Maximum transfer distance1000 m
Data transfer rate100 Mbit/s
Auto MDIX IEEEYes
Harmonized System (HS) code85176990
Network
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ports & interfaces
Ethernet LAN (RJ-45) ports2
Design
Product colourBlack
Power
AC input voltage230 V
AC input frequency50 - 60 Hz
External power adapterYes
Output voltage12 V
Output current1 A
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)0 - 70 °C
Operating relative humidity (H-H)10 - 90%
Weight & dimensions
Width72 mm
Depth95 mm
Height22 mm
Weight90 g
Colour
Product colourBlack
Packaging data
Package width148 mm
Package depth137 mm
Package height95 mm
Logistics data
Harmonized System (HS) code85176990
Manufacturer StarTech.com
På lager Y